Skip to product information
Suitable for Ignition Coil for Cadillac DTS STS Buick Lucerne V8 (2004-2011) | UF564 12594176
1/7

Suitable for Ignition Coil

for Cadillac DTS STS Buick Lucerne V8 (2004-2011)
🏷️ Replaces OE: UF564 12594176
7 left
$24.95
COPY
5% OFF
OFFER5 ✔ Copied
Copy to get a discount code
If problem with product: Free Returns & Refunds
  • Visa
  • Mastercard
  • American Express
  • Discover
  • JCB
  • PayPal
Standard Calculating... Free
Dispatched from US Local Warehouse
  • Fast Free Shipping
  • 2-Year Warranty
  • 30-Day Free Returns
  • 24/7 Customer Service
  • Guaranteed Exact Fit
Check if this fits your vehicle Close

Automotive-Leader Ignition coil

Applications

Year
Make
Model
Engine/Displacement
2004-2005
Cadillac
Deville
4.6L V8
2004
Cadillac
Seville
4.6L V8
2007-2011
Cadillac
DTS (Sedan, Hearse, Limousine)
4.6L V8
2008-2009
Cadillac
SRX
4.6L V8
2007-2009
Cadillac
STS
4.6L V8
2007-2009
Cadillac
STS
4.4L V8 (Supercharged)
2007-2009
Cadillac
XLR
4.4L V8
2007-2009
Cadillac
XLR
4.6L V8
2007-2011
Buick
Lucerne
4.6L V8

 

Product Specifications

Warranty & Support: 2 Years + Pre-sale Load Test + 24/7 Technical Support
Item
Specification
Core Part Number
UF-564
Interchange: 12670154, GN10455, C1556, 5C1613, D596A, E1064, 52-1854, IC644, 0997000940, 12597745, 12602862, UF-543, UF543
Position
Engine, Coil On Plug
Key Parameters
- Type: Direct Replacement Ignition Coil
- Pin Count: 4-Pin
- Coil Type: Coil On Plug (COP)
- System Voltage: 12V
- Performance: Fast response speed, stable performance, and high sensitivity with a high signal-to-noise ratio, delivering near-original effect.
Vehicle Fitment
Cadillac: Deville 4.6L V8 (2004-2005), Seville 4.6L V8 (2004), DTS 4.6L (2007-2011), SRX 4.6L (2008-2009), STS & XLR 4.6L (2007-2009)
Buick: Lucerne 4.6L (2007-2011)
Pontiac: Bonneville 4.6L (2004-2005)

 

How to install the ignition coil ?

Step 1 - Remove the fuel rails by simply unbolting the two bolts on the top, then gently pulling it up.

Step 2 - Remove the bolts/connectors from the ignition coil in a numerical order.

Step 3 - Repeat this step for each coil.

Step 4 - Best to replace the entire coil pack as opposed to just one coil in order to avoid malfunctions in the future. The coils should snap into place.

Step 5 - The coil bolts should be precisely tightened to 50 inch pounds.

Step 6 - Using the palm of your hand, snap the fuel rail back into place and tighten the bolts around it.

Please check the fitment notes for Oxygen sensor installation location information!!!

Bank 1 Sensor 1 means Upstream Right/Rear; Bank 2 Sensor 1 means Upstream Left/Front

Bank 1 Sensor 2 means Downstream Right/Rear; Bank 2 Sensor 2 means Downstream Left/Front

sensor 1=Upstream sensor 2=Downstream

Subscribe to our email list to receive a 8% VIP discount