Skip to product information
1 left
Warranty & Support: 6 Months + 24/7 Technical Support
3Pcs Ignition Coil Set for Sea-Doo Spark 900 ACE RXP GTX - 420666142
To find other part numbers please search below
$67.95
Hard to read? Adjust text size here:
Skip complex tables: Enter info to verify fitment
🔍 5. Select OE Part Number(s)...
30-Day Returns
Easy FL Return
Easy FL Return
2-Year Warranty
100% Brand New
100% Brand New
Direct Fit
Guaranteed Match
Guaranteed Match
Automotive-Leader Ignition coil
Applications
|
|
|
|
|
|---|---|---|---|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Product Specifications
|
|
|
|---|---|
|
|
Interchange: 420666141, 420-666-140, 420-666-141 |
|
|
|
|
|
- Pin Count: 3-Pin - Connector: Plug In Type - Material: Plastic Housing - Performance: Fast response speed, stable performance, close to original effect - Signal Quality: High sensitivity and high signal-to-noise ratio within operating range, minimizing external interference |
How to install the ignition coil ？
Step 1 - Remove the fuel rails by simply unbolting the two bolts on the top, then gently pulling it up.
Step 2 - Remove the bolts/connectors from the ignition coil in a numerical order.
Step 3 - Repeat this step for each coil.
Step 4 - Best to replace the entire coil pack as opposed to just one coil in order to avoid malfunctions in the future. The coils should snap into place.
Step 5 - The coil bolts should be precisely tightened to 50 inch pounds.
Step 6 - Using the palm of your hand, snap the fuel rail back into place and tighten the bolts around it.
A Guide for Users Without Repair Experience
1. When your vehicle malfunctions, use a CBD to scan and identify the fault codes (if you're unsure how to scan or interpret the codes, visit our blog for guidance).
2. Identify the faulty component based on the diagnostic code and remove it.
3. Select your vehicle's year, model, and brand directly from the search panel below, or search by the part number on the component to verify compatibility.
4. After selecting, click “Search.” A green result confirms the part is compatible. If unsure, click the result below to view deta
Please check the fitment notes for Oxygen sensor installation location information！！！
Bank 1 Sensor 1 means Upstream Right/Rear; Bank 2 Sensor 1 means Upstream Left/Front
Bank 1 Sensor 2 means Downstream Right/Rear; Bank 2 Sensor 2 means Downstream Left/Front
sensor 1=Upstream sensor 2=Downstream