Skip to product information
In stock
Warranty & Support: 2 Years + Pre-sale Load Test + 24/7 Technical Support
4Pcs Ignition Coil for BMW S1000RR Motorcycle (2012-2014) - 771087401
Sale price
$77.95
Regular price
$84.95
-8%
🔥Automatically enjoy an 8% discount
A Guide for Users Without Repair Experience
1. When your vehicle malfunctions, use a CBD to scan and identify the fault codes (if you're unsure how to scan or interpret the codes, visit our blog for guidance).
2. Identify the faulty component based on the diagnostic code and remove it.
3. Select your vehicle's year, model, and brand directly from the search panel below, or search by the part number on the component to verify compatibility.
4. After selecting, click “Search.” A green result confirms the part is compatible. If unsure, click the result below to view deta
Verify Fitment for Your Vehicle
🛡️ Four Major Safeguards
Free & Fast ShippingShips within 72 hrs from US
30-Day ReturnsReturn to our FL, USA center
2-Year Warranty100% Brand New & Tested
Secure PaymentEncrypted checkout
Automotive-Leader Ignition coil
Applications
|
|
|
|
|---|---|---|
|
|
|
|
Product Specifications
|
|
|
|---|---|
|
|
Interchange: 771087402, 7710874 02 |
|
|
|
|
|
- Pin Count: 3-Pin - Coil Type: Coil On Plug (COP) - Performance: Fast response speed and stable performance, close to original effect. Provides high sensitivity and high signal-to-noise ratio within its operating range, minimizing external interference. |
How to install the ignition coil ？
Step 1 - Remove the fuel rails by simply unbolting the two bolts on the top, then gently pulling it up.
Step 2 - Remove the bolts/connectors from the ignition coil in a numerical order.
Step 3 - Repeat this step for each coil.
Step 4 - Best to replace the entire coil pack as opposed to just one coil in order to avoid malfunctions in the future. The coils should snap into place.
Step 5 - The coil bolts should be precisely tightened to 50 inch pounds.
Step 6 - Using the palm of your hand, snap the fuel rail back into place and tighten the bolts around it.
Please check the fitment notes for Oxygen sensor installation location information！！！
Bank 1 Sensor 1 means Upstream Right/Rear; Bank 2 Sensor 1 means Upstream Left/Front
Bank 1 Sensor 2 means Downstream Right/Rear; Bank 2 Sensor 2 means Downstream Left/Front
sensor 1=Upstream sensor 2=Downstream
Why Choose Automotive-Leader Product?
Fast Response & Speed & Stable Performance & Longer Service Life
High-quality materials used, enhance durability performance
100% Rigorous Tested Before On Sale & Shipment
Meet The Professional Specification As OEM Standard