Skip to product information
Warranty & Support: 2 Years + Pre-sale Load Test + 24/7 Technical Support
Suitable for 4Pcs Ignition Coil
for BMW S1000RR Motorcycle (2012-2014)
Replaces OE: 771087401
Resolves Symptoms:
Engine misfires
Hard starting
Power loss
Rough idling
Check if your car is compatible
This helps guarantee fitment of parts.
Delivery Free
Aug 1 - Aug 4
🚚 Fast US Local: Dispatched quickly from our local US warehouses for swift delivery.
2-Year Warranty
🛡️ Quality Coverage: Protects against any manufacturing defects for 2 full years.
🔄 Free Replacement: We will provide a brand-new replacement for free if any quality issues occur.
60-Day Return & Refund
📦 Free Returns & Exchanges: Zero costs to you if the product has any quality issues.
💰 Full Refunds: 100% money-back guarantee within 60 days for defective items.
Review Rewards & Cashback
Share an install photo & review to unlock tier rewards:
🥈 Under $50
3% Off Next Order
🥇 $50+ Orders
5% Direct Cashback
🔥 Tip: Buy a Combo Set to easily hit $50 and unlock 5% Cashback!
💡 How to claim: Email a screenshot of your review to our support team.
$77.95
- No other fees; this is the final payment price
- Get rid of your car's malfunctions and start a pleasant driving journey
Check Engine Light? Find Your Symptoms
🌬️ O2 & A/F Sensors
- P0134No Activity Detected
- P0135Heater Circuit Malfunction
- P0137/38Circuit Low/High Voltage
- P2195Signal Stuck Lean
- P0030/31Heater Control Circuit
⛽ Fuel & Air Mixture
- P0171/74System Too Lean
- P0172System Too Rich
- P2096Post-Catalyst Trim Too Lean
- P0087Fuel Rail Pressure Low
- P0201-04Injector Circuit Open
♻️ Catalytic Converters
- P0420Efficiency Below Threshold (B1)
- P0430Efficiency Below Threshold (B2)
⚡ Ignition / Misfires
- P0300Random Misfire
- P0301-06Cylinder-Specific Misfire
🚛 NOx Sensors & SCR
- P2200/02Sensor Circuit / Signal Low
- P229FCircuit Range/Performance
- P207FReductant Quality Perf.
- 46F2/4D16BMW SCR Efficiency Faults
🛑 ABS & Wheel Speed
- C1021Front Wheel Speed Sensor
- C1025Sensor Signal Erratic
- C1207ABS Pump Overrun
- C0561System Disabled
Automotive-Leader Ignition coil
Applications
|
|
|
|
|---|---|---|
|
|
|
|
Product Specifications
|
|
|
|---|---|
|
|
Interchange: 771087402, 7710874 02 |
|
|
|
|
|
- Pin Count: 3-Pin - Coil Type: Coil On Plug (COP) - Performance: Fast response speed and stable performance, close to original effect. Provides high sensitivity and high signal-to-noise ratio within its operating range, minimizing external interference. |
How to install the ignition coil ？
Step 1 - Remove the fuel rails by simply unbolting the two bolts on the top, then gently pulling it up.
Step 2 - Remove the bolts/connectors from the ignition coil in a numerical order.
Step 3 - Repeat this step for each coil.
Step 4 - Best to replace the entire coil pack as opposed to just one coil in order to avoid malfunctions in the future. The coils should snap into place.
Step 5 - The coil bolts should be precisely tightened to 50 inch pounds.
Step 6 - Using the palm of your hand, snap the fuel rail back into place and tighten the bolts around it.